No sound in IPTV Smarters Pro: causes and incompatible audio codecs
The no-sound problem occurs when the audio stream uses a codec that the current player cannot decode. The most common audio codecs used in IPTV streams:
| Codec | ExoPlayer (internal) | VLC (external) |
|---|---|---|
| AAC | Yes | Yes |
| MP3 | Yes | Yes |
| AC3 / Dolby Digital | Limited (depends on device) | Yes |
| EAC3 / Dolby Digital Plus | Rarely | Yes |
In practice: if the channel has video but no sound, the audio is likely AC3 or EAC3 and the active player is ExoPlayer without support for that codec on your device. The fix is to switch to VLC.
Other possible causes (less common):
- System or app volume at zero — check before making any player change
- HDMI cable or TV audio output configured incorrectly — check whether other content has sound
- The channel has two audio tracks and the selected one is silent — try changing the audio track inside the channel (audio icon during playback)
- Server connectivity issues — check whether other channels have the same problem
A black screen means video is not being rendered, but the server connection exists. Live channel streams, series and VOD films have different codec requirements — which is why one channel may show a black screen while another works normally. Main causes:
Incompatible video codec (H.265/HEVC) H.265/HEVC streams can cause a black screen in ExoPlayer on Android devices without hardware acceleration for this codec. VLC fixes this because it does software decoding when hardware does not support it.
DRM (content protection) Some streams have Widevine DRM protection. ExoPlayer supports Widevine; VLC does not. If the screen is black with VLC but works with ExoPlayer, the stream may have DRM.
Too high resolution or bitrate 4K (2160p) streams on devices without sufficient decoding capacity may cause a black screen. Check whether other Full HD channels work normally.
Temporary server issue If all channels go black at the same time, the problem is on the operator's server, not in the app. Wait a few minutes and try again. See the IPTV Smarters Pro error hub for a full diagnostic tree.
VLC vs ExoPlayer in IPTV Smarters Pro: which player to choose to fix no sound and black screen
The two players available in the app have distinct characteristics. This table helps you decide which to use:
| Criterion | ExoPlayer (internal player) | VLC (external player) |
|---|---|---|
| AC3/EAC3 audio codecs | Limited (depends on Android device) | Yes |
| H.265/HEVC video codecs | Yes, if hardware supports it | Yes (software if needed) |
| Widevine DRM | Yes | No |
| Channel opening latency | Fast | Slightly slower |
| Available on iOS/tvOS | Internal player only | Via installed VLC app (iOS) |
| Available on Samsung/LG Smart TV | Internal player only | Not available |
| Recommended for | DRM streams, compatible SD/HD channels | AC3/EAC3 streams, H.265 channels |
Practical recommendation: - No sound → try VLC first - Black screen on H.265 → try VLC - Black screen that gets worse with VLC → switch back to ExoPlayer (may be DRM) - Samsung/LG Smart TV → internal player only (see Smart TV guide)
How to switch player in IPTV Smarters Pro: ExoPlayer and VLC setup on Android, iOS and Smart TV
How to switch player in IPTV Smarters Pro (Android / Android TV):
Method 1 — Switch player globally (all channels): 1. Go to app Settings (gear icon). 2. Tap Playback Settings (Player Settings). 3. Under Default Player, select VLC or External player. 4. If VLC does not appear in the list, first install VLC for Android from the Google Play Store or the official site videolan.org. 5. Save and reopen a channel to test.
Method 2 — Switch player for a specific channel: 1. In the channel list, long-press the problem channel. 2. Select Play with or Change player. 3. Choose VLC or ExoPlayer.
On iPhone/iPad (iOS): The external VLC player is only available if you have the VLC app installed. Inside IPTV Smarters Pro, in the playback settings, you can select External player and then choose VLC when a channel opens. For persistent problems on iOS, see the iPhone and Apple TV installation guide.
On Samsung / LG Smart TV: On these platforms, the external VLC player is not available. If the black screen persists, check the TV's video output settings (HDR, colour format). See the Smart TV guide.
After switching player, if the problem persists on all channels, the buffering and freezing guide has additional diagnosis for server connectivity issues. If the fault appeared after a new Xtream Codes account setup, check credentials first in the Xtream Codes and M3U setup guide — a typing error in the password or server URL can cause a black screen with no clear error message.
Is VLC free?
Yes. VLC is free and open-source software, available on videolan.org for Android, iOS, Windows and macOS. On iOS, the VLC app is available free from the App Store.
I have sound but the quality is poor. Does the player affect this?
Yes. ExoPlayer uses hardware acceleration when available. If sound is distorted, try switching between players.
Screen goes black only on HD channels but not SD. Why?
HD channels typically use H.265/HEVC to save bandwidth. If your Android device has no hardware acceleration for H.265, ExoPlayer cannot render the video. Switching to VLC fixes this because it does software decoding.
After switching to VLC, there is a delay between sound and image (lip sync). This desync can be corrected within VLC: during playback, go to player settings and adjust audio delay (Audio delay). Alternatively, switch back to ExoPlayer if the codec is supported.
On Fire TV Stick I do not see the VLC option. What can I do?
On Fire TV Stick, VLC is available in the Amazon Appstore (Fire TV version). Install VLC first, then return to IPTV Smarters Pro — the option will appear in playback settings.
Is the app compatible with 4K streams?
Yes, if your device can decode 4K and your internet connection has enough bandwidth (minimum 25 Mbps for 4K recommended). Older devices without 4K acceleration may show a black screen on these streams.